What is MY IP Address SSD VPS

Konuyu Değerlendir
  • 1 Oy - 5 Ortalama
  • 1
  • 2
  • 3
  • 4
  • 5

vPlug Server v1.0.2.21
#11

I recently discovered vPlug Server v1.0.2.16. My opinion: Excellent tool.
My surprise was that it suport also Nagra and Cryptoworks cards through CardReader_Module.
In the description file there is a example with HD+ and ORF cards:
Alıntı:
Info: Server [16:14:26.198] Loading sc_nagra.mdl ...
Info: Module [16:14:26.226] sc_nagra: Start Nagravision card reader
Info: Module [16:14:26.226] sc_nagra: Try to open port COM2
Info: Module [16:14:26.244] sc_nagra: Resetting card...
Info: Module [16:14:27.608] sc_nagra: Using 368 mhz for cardclock
Info: Module [16:14:27.608] sc_nagra: Using actual 9600 baud, change it to 115200
Info: Module [16:14:27.616] sc_nagra: ATR: 3FFF9500FF918171A04700444E415350313830204D657230303028
Info: Module [16:14:27.616] sc_nagra: [Nagravision] Detected native Nagravision card
Info: Module [16:14:27.989] sc_nagra: [Nagravision] Type: NAGRA, CAID: 1843, IRD ID: FFFFFFFF
Info: Module [16:14:27.989] sc_nagra: [Nagravision] ProviderID 00003411
Info: Module [16:14:28.501] sc_nagra: [Nagravision] ID 8011, Tier: 0066, Date: 2011.04.07 - 2012.04.07
Info: Module [16:14:28.546] sc_nagra: [Nagravision] ID 8011, Tier: 0067, Date: 2010.01.19 - 2010.01.20
Info: Module [16:14:29.105] sc_nagra: [Nagravision] ROM: D N A S P 1 8 0
Info: Module [16:14:29.105] sc_nagra: [Nagravision] REV: M e r 0 0 0
Info: Module [16:14:29.105] sc_nagra: [Nagravision] SER: Hex: 48XXXXXX, ASCII: 122xxxxxxx
Info: Module [16:14:29.105] sc_nagra: [Nagravision] CAID: 1843
Info: Module [16:14:29.105] sc_nagra: [Nagravision] Prv.ID: 00003411 (sysid)
Info: Module [16:14:29.105] sc_nagra: [Nagravision] Prv.ID: 00000000
Info: Module [16:14:29.105] sc_nagra: [Nagravision] Prv.ID: 00008011
Info: Server [16:14:29.114] Added Card info of sc_nagra to card list
Info: Server [16:14:29.114] Loaded module: sc_nagra.mdl, Version: 1.0, Author: Project:Keynation

I tried with my DiGi TV N3 card but unfortunately was not working:
Alıntı:
Info: Server [17:45:32.609] Loading sc_nagra.mdl ...
Info: Module [17:45:32.625] sc_nagra: Start Nagravision card reader
Info: Module [17:45:32.625] sc_nagra: Try to open port COM1
Info: Module [17:45:32.625] sc_nagra: Resetting card...
Info: Module [17:45:33.921] sc_nagra: Using 368 mhz for cardclock
Info: Module [17:45:33.921] sc_nagra: Using actual 9600 baud, change it to 9909
Error: Module [17:45:33.921] sc_nagra: Card with protocol T=11 is not supported
Info: Server [17:45:33.937] Loaded module: sc_nagra.mdl, Version: 1.3, Author: Project:Keynation

Can anyone help me with this CardReader_Module?
Is there any home page for Project Keynation ?

[Resim: dEVd2.jpg]
Alıntı
#12

thanks this information mate... now add the new version other subject ...
Alıntı
#13

vPlug Server v1.0.2.16 çıktı indirme linki 1. mesajda.
Alıntı
#14

Arkadaşlar biss keyli kanallaır açmıyor? Sebep endir? keyi kontrol ettim v_sids ve v_keys dosyalarını düzenledim tekrar ve provider dosyasınıda editledim ama bis keyli kanalları yinede açmıyor.Yardımcı olabilecek olan yok mu?
Alıntı
#15

(27-07-2011, 18:26)yunusbeen demiş ki:  Arkadaşlar biss keyli kanallaır açmıyor? Sebep endir? keyi kontrol ettim v_sids ve v_keys dosyalarını düzenledim tekrar ve provider dosyasınıda editledim ama bis keyli kanalları yinede açmıyor.Yardımcı olabilecek olan yok mu?

evet ne yaparsam yapım emu ları acmıyor hatta yeni versiyon çıkmış vPlug_Server_v1.0.2.18
ile denedim yine sonuc aynı konu hakkında bilen arkadaşlardan yardımlarını bekliyorum

bu arada yeni veriyon download
http://www.mediafire.com/?meq0d8rb27w30f3
Alıntı
#16

vPlug Server v1.0.2.18 çıktı ilk mesaja eklendi.
Alıntı
#17

Nagra CardReader Module updated to version 1.5 but unfortunately still not working with DiGi N3 cards.

Alıntı: Info: Server [06:10:19.938] Trying now to start local card reader sc_nagra.mdl
Info: Module [06:10:19.938] sc_nagra: Start Nagravision card reader
Info: Module [06:10:19.938] sc_nagra: Try to open port COM1
Info: Module [06:10:19.938] sc_nagra: Resetting card...
Info: Module [06:10:21.251] sc_nagra: Using 368 mhz for cardclock
Info: Module [06:10:21.251] sc_nagra: Using actual 9600 baud, change it to 9909
Error: Module [06:10:21.251] sc_nagra: Card with protocol T=11 is not supported
Alıntı
#18

Can anyone please confirm if TNT Sat work with vPlug Server or not.

I read on the site:
Alıntı: To watch TNT Sat, vplug needs a much more packed size so it works on TNT Sat by increasing packed size from host program (if its adjustable). It's working with Alexi's Open Viaccess Module.

[Resim: MF3V0.jpg]

I did not managed to make it work Huh

[Resim: o35RN.jpg]

   

Thank you.
Alıntı
#19

(23-09-2011, 6:12)WinRxp1024 demiş ki:  Can anyone please confirm if TNT Sat work with vPlug Server or not.

I read on the site:
Alıntı: To watch TNT Sat, vplug needs a much more packed size so it works on TNT Sat by increasing packed size from host program (if its adjustable). It's working with Alexi's Open Viaccess Module.

[Resim: MF3V0.jpg]

I did not managed to make it work Huh

[Resim: o35RN.jpg]



Thank you.

try mdplug or download last updated vplug from softcam page
Alıntı
#20

I'm interested in vPlug Server and not vPlug Plugin.

I don't think vPlug Server work with mdPlug or can add new vPlug Plugin.

Correct me if i'm wrong.

   

Does TNT Sat work with latest version of vPlug Server ?
(I did not managed to make it work)

   
Alıntı




Bu konuyu görüntüleyen kullanıcı(lar): 1 Ziyaretçi